Top 7 Signs You Need New Armstrong Air Furnace Parts


An Armstrong Air furnace keeps your home warm and comfortable during cold months by relying on many parts working together. When key components start failing, your furnace’s efficiency, comfort, and safety can be affected. Catching these issues early helps avoid costly repairs and breakdowns. In this article, we’ll cover the top seven signs that indicate you may need new Armstrong Air furnace parts, helping you identify problems early and keep your system running smoothly.

Common Signs of Armstrong Air Furnace Parts That Need Replacement

Recognizing these common signs early can help you maintain your Armstrong Air furnace’s efficiency and avoid costly repairs.

1. Furnace Runs But Doesn’t Heat Properly

If your furnace runs but the air blowing from vents is cool or lukewarm, it’s a sign that heating components may be failing or malfunctioning, impacting your home's warmth.

Signs of a Failing Heating Component

  • Cool or Lukewarm Air: Air feels cold or barely warm despite the furnace running continuously.

  • Longer Run Time: The Furnace runs longer than usual without reaching the set thermostat temperature.

  • Burning Smell or Discoloration: You might notice a faint burning odor or discoloration near the burner area.

Fix: Turn off the furnace immediately and call a professional technician to inspect and replace worn parts like burners, heat exchangers, or gas valves as soon as possible.

2. Frequent Furnace Cycling (Turning On and Off)

When your furnace turns on and off repeatedly within short periods, it may indicate faulty parts causing short cycling or system inefficiencies that waste energy.

Signs of Short Cycling

  • Rapid Cycling: The furnace starts and stops frequently during use without completing full heating cycles.

  • Temperature Fluctuations: Rooms quickly go from warm to cold repeatedly, causing discomfort.

  • Higher Energy Bills: Unexpected spikes in heating costs without changes to thermostat settings.

Fix: Replace dirty air filters and have a licensed technician check the thermostat and limit switch for any faults causing the short cycling issue.

3. Strange Noises Coming From the Furnace

Unusual sounds like rattling, banging, or squealing are warning signs of failing furnace parts that require immediate attention to avoid further damage.

Signs of Failing Parts

  • Rattling or Banging: Loud noises are heard during startup or while the furnace is running.

  • Squealing or Whining: High-pitched sounds from blower belts or motor bearings signal serious wear.

  • Grinding or Scraping: This may indicate worn or damaged motor parts requiring immediate replacement.

Fix: Tighten any loose parts, replace worn belts, and repair or replace motors as needed to eliminate noises and prevent future mechanical failure.

4. The Furnace Won’t Start or Has Trouble Igniting

Difficulty starting your furnace can point to ignition system problems or faulty control components that disrupt the heating process.

Signs of Ignition Issues

  • Clicking Without Flame: Igniter clicks, but the burner fails to light consistently after multiple attempts.

  • Multiple Attempts to Ignite: The furnace attempts to start repeatedly but fails to do so properly every time.

  • Error Codes: The control panel may display ignition failure messages or system warnings indicating issues.

Fix: Clean or replace the igniter and flame sensors, and have a professional inspect the control board to ensure proper ignition and safety.

5. Increased Energy Bills Without Usage Changes

If your heating bills rise without any changes in use, your furnace may be working harder due to failing or inefficient parts that lower overall efficiency.

Signs of Reduced Efficiency

  • Higher Bills: Unexpectedly increased heating costs despite no thermostat or usage changes at home.

  • Longer Operation: The furnace runs more frequently or for longer periods than usual without adequately heating the rooms.

  • Reduced Comfort: The home feels colder even though the furnace is running continuously and frequently.

Fix: Replace air filters regularly and have blower motors, gas valves, and other critical components inspected by a professional technician.

6. Poor Airflow From Vents

Weak airflow is often a symptom of blower motor issues, worn belts, or ductwork problems restricting proper circulation throughout the house.

Signs of Airflow Problems

  • Weak or No Airflow: Little to no air comes from vents, even when the furnace is running at full capacity.

  • Cold Rooms: Some rooms remain noticeably colder despite the heating system running continuously.

  • Dust or Odors: Unusual smells or dust blowing from vents during furnace operation.

Fix: Replace filters, inspect ducts for leaks or blockages, and repair or replace blower motors or belts to restore proper airflow throughout your home.

7. Visible Signs of Wear or Damage on Furnace Parts

Physical signs of wear or damage often precede mechanical or performance failures in your furnace’s components, which can lead to serious issues.

Signs of Visible Damage

  • Rust or Corrosion: Noticeable on burners, heat exchangers, or other metal components exposed to heat.

  • Soot or Burn Marks: Found near burners or flame sensor areas, indicating poor combustion or damage.

  • Frayed or Cracked Belts: Visible blower belt damage affects overall furnace operation.

Fix: Schedule a professional inspection immediately and promptly replace damaged parts to maintain safety and optimum performance.

Preventive Tips to Avoid Armstrong Air Furnace Part Failures

Regular maintenance keeps your furnace running smoothly and efficiently for many years:

  • Change air filters every 1–3 months, depending on usage frequency.

  • Schedule annual professional inspections and tune-ups with an HVAC specialist.

  • Address strange noises or unusual smells immediately when noticed.

  • Keep the furnace area clean and free of dust, debris, and obstacles.

A well-functioning Armstrong Air furnace is essential for keeping your home warm, safe, and comfortable during the colder months. When components begin to fail, it can lead to reduced efficiency, higher energy bills, or sudden breakdowns. Addressing these issues early helps prevent costly repairs and extends the life of your system.

Need reliable Armstrong Air furnace parts? PartsHnC stocks high-quality components like igniters, blower motors, gas valves, and heat exchangers to keep your furnace running efficiently all season long.

FAQs

How long do Armstrong Air furnaces last?

Armstrong Air furnaces typically last between 15 to 20 years with proper maintenance. Regular servicing and timely repairs can help extend their lifespan and maintain efficient performance.

How do I reset my Armstrong Air furnace?

Turn off the power to the Armstrong Air furnace, press and hold the red or yellow reset button inside for 30 seconds, then turn the power back on. If it doesn’t work, call a technician.

Is it safe to replace Armstrong Air furnace parts on my own?

Basic maintenance, like changing filters, can be done by homeowners, but replacing internal components (e.g., igniters, gas valves, or motors) should be left to licensed HVAC professionals to ensure safety and proper installation.

How do I light the pilot light on my Armstrong Air furnace?

Turn the gas valve to “Off” and wait 5 minutes. Then set it to “Pilot,” press and hold the reset button, ignite the pilot with a lighter, hold for 30 seconds, release, and turn the valve to “On.”

 

Location: United States

Comments

Post a Comment

Popular posts from this blog

Aprilaire Thermostat Went Blank: Here’s How to Fix the Issue

Image
An Aprilaire thermostat is essential for maintaining a comfortable and energy-efficient home by regulating temperature settings. When it’s working properly, it offers convenience and control over your HVAC system. However, if the display goes blank, it can leave you feeling frustrated and unsure of what to do. A blank screen may be caused by issues such as power supply problems, loose wiring, dead batteries, or even a malfunctioning circuit board.  In this guide, we’ll walk you through simple troubleshooting steps to get your Aprilaire thermostat up and running again, restoring comfort to your home. Common Reasons Why Your Aprilaire Thermostat Went Blank The few basic problems are most likely responsible for your Aprilaire thermostat displaying a blank screen. The following list explains the possible reasons behind a blank Aprilaire thermostat display: Power Supply Issues: A lack of power supply stands as the primary reason behind your thermostat displaying a blank screen. The abs...
Read more

HVAC Basics: Here’s How to Clean a Hot Water Heater

Image
  A hot water heater is one of the most common household appliances serving to produce warm water for taking baths, washing dishes and hearing rooms. If you want your heater to operate optimally and give you years of service, maintenance is very important. Although, one of the most vital maintenance activities is cleaning a hot water heater. In the long run, the interior of the pipes may fill with sediment, minerals, and debris, which will result in inefficiency, poor performance and expensive repairs. This article will provide an understanding of HVAC basics on how to clean your hot water heater and how to maintain it properly. Understanding the Role of a Hot Water Heater One of the most significant equipment in the home is the hot water heater, which provides consistent hot water. It can be a gas water heater if your system is set up that way or an electric water heater. Heater is a combination of hot water heater parts which include the tank, thermostat, heating elements, and ...
Read more

Dual-Fuel Heat Pumps The Smart Way to Save on Energy Bills

Image
In today’s world, where sustainability and energy efficiency are at the forefront of everyone’s minds, homeowners are increasingly seeking ways to reduce their energy consumption and lower their utility bills. With a growing awareness of the environmental impact of traditional heating and cooling systems, dual-fuel heat pumps are rapidly gaining popularity as an innovative solution. In this article, we will delve into the ins and outs of dual-fuel heat pumps, how they work, and why they may be the smart choice for your home to save on energy costs. What is a Dual-Fuel Heat Pump? A dual-fuel heat pump is a highly efficient HVAC system that combines the functionality of an electric heat pump with a secondary gas furnace or other supplemental heating sources. The key feature of dual-fuel heat pumps is their ability to operate efficiently across a range of temperatures by switching between two energy sources—electricity and gas, or sometimes oil—depending on the outdoor conditions. How Doe...
Read more